If you download to a new destination file, go to the File Management, Set Start- Up
menu, mark the operation code file used at startup, and click Ap ply. To start the n ew
firmware, reboot the system via the System/Reset menu.
Figure 4-12 Setting the Startup Code
To delete a file select System, File Management, Delete. Select the file name from
the given list by checking the tick box and click Apply. Note th at the fil e currently
designated as the startup code cannot be deleted.
Figure 4-13 Deleting Files
CLI
– To download new firmware form a TFTP server, enter the IP address of the
TFTP server, select “config” as the file type, then enter the source and destination
file names. When the file has finished downloadi ng, set th e ne w file to s tart up the
system, and then restart the switch.
4-23
Managing Firmware
4