Click Priority, IP Port Priority. Enter the port number for a network application i n the
IP Port Number box and the new CoS val ue in the Cla ss of Servi ce box, and th en
click Apply.
Figure 13-9 IP Port Priority
CLI
– The following example globally enables IP Port Priority service on th e switch,
maps HTTP traffic (on port 1) to CoS value 0, a nd then displ ays the IP Port Pri ority
settings.
Console(config)#map ip port
Console(config)#interface ethernet 1/1
Console(config-if)#map ip port 80 cos 0
Console(config-if)#end
Console#show map ip port ethernet 1/5
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#
* Mapping specific values for IP Port Priority is implemented as an interface configuration
command, but any changes will apply to the all interfaces on the switch.
13-12
35-7
27-1
35-8
3
5
-
1
1
Class of Service
13