• Member List (Current) – Shows configured trunks (Trunk ID, Unit, Port).
• New – Includes entry fields for c reatin g new trunk s.
- Trunk – Trunk identifier. (Range: 1-32)
- Unit – Stack unit. (Range: 1-8)
- Port – Port identifier. (Range: 1-25/49)
Web
– Click Port, Trunk Membership. Enter a trunk ID of 1-32 in the Trunk field,
select any of the switch ports from the scroll-down port lis t, and clic k Add. Aft er you
have completed adding ports to the member list, click Apply.
Figure 8-3 Static Trunk Configuration
8-7
8
Creating Trunk Groups
statically
configured
active
links
Statically Configuring a Trunk
Command Usage
• When configuring static trunks, you may not be
able to link switches of different ty pes,
depending on the manufacturer’s
implementation. However, note that the static
trunks on this switch are Cisco EtherChannel
compatible.
• To avoid creating a loop in the network, be sure
you add a static trunk via the confi guration
interface before connecting the ports, and also
disconnect the ports before removing a static
trunk via the configuration interface.
Command Attributes