Asante Technologies 40240/40480-10G clock timezone , clock timezone-predefined , 23-39,

clock timezone
This command sets the time zone for the switch’s interna l clo ck.
Syntax
clock timezone name hour hours minute minutes {before-utc | after-utc}
• name - Name of timezone, usually an acron ym. (Range : 1-29 cha racte rs)
• hours - Number of hours before/after UTC . (Rang e: 0-13 ho urs)
• minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)
• before-utc - Sets the local time zone before (east) of UTC .
• after-utc - Sets the local time zone after (west) of UTC .
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zo ne relative to the Coordinated U niversal
Time (UTC, formerly Greenwich Mean Time or GMT), based on t he earth’s
prime meridian, zero degrees longitude. To display a time corr esponding to
your local time, you must indicate the nu mber of ho urs and minute s your time
zone is east (before) or west (after) of U TC.
Example
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
Related Commands
show sntp (23-38)
clock timezone-predefined
This command uses predefined time zone configurations to set the time zone for the
switch’s internal clock. Use the
no form to restore the default.
Syntax
clock timezone-predefined
offset-city
no clock timezone-predefined
• offset - Select the offset from GMT. (Range: GMT-0 100 - GM T-1200;
GMT-Greenwich-Mean-Time; GMT+0100 - GMT+1400)
• city - Select the city associated with the chosen GMT offset. After the offset
has been entered, use the tab-complete function to display the a vail able
city options.
Default Setting
GMT-Greenwich-Mean-Time-Dublin,Edinburgh,Lisbon,London
23-39
Time Commands
23