Command Mode

Global Configuration

Example

Console(config)#logging sendmail
Console(config)#

show logging sendmail

This command displays the settings for the SMTP event handler.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
SMTP minimum severity level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP source email address: bill@this-company.com
SMTP status: Enabled
Console#
Time Commands

The system clock can be dynamically set by po lling a set of specifie d time servers

(NTP or SNTP). Maintaining an accurate time on the switch enables the system log

to record meaningful dates and times for event entries. If the clock is not set, the

switch will only record the time from the factory default set at t he last bo otup.

Table 23-13 Time Commands

Command
sntp client
sntp server
sntp poll
sntp update-time
show sntp
clock timezone
clock timezone-predefined
Function Mode Page
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for time
Sends a request to immediately update the time
Shows current SNTP configuration settings
Sets the time zone for the switch’s internal clock
Sets the time zone for the switch’s internal clock using
predefined time zone configurations
GC 23-36
GC 23-37
GC 23-37
GC 23-38
NE, PE 23-38
GC 23-39
GC 23-39

23-35

Time Commands

23