To print out a list of all the functions of the On- Air DECTf@x Plus, which allows you to see them at a glance, along with the function codes to carry them out, see ÔPrinting out the functions listÕ on page 45.

There are a number of buttons which are used to access the functions of your On-Air DECTf@x Plus:

Button What itÕs used for

Accesses the function menus Confirms an entry or option and selects the current menu

Exits the function menus. Any changes which were not confirmed will not be saved

Scrolls up through the menus

Scrolls down through the menus

Moves the cursor right or selects a displayed menu item

Moves the cursor left and deletes, and takes you back through menu layers

Enables you to exit the current function or go back through the menus

Setting up

Date and time

It is important that your On-Air DECTf@x Plus is always set to the correct date and time. This information is shown on the fax received by the addressee and is required for faxes programmed to be sent at a later date.

Setting the date and time

1Press OK/Menu then 2 then 1 then

OK/Menu.

AB

1

2

C

The display shows the date and time currently programmed.

2Use the keypad to enter the date. For example, for 27th May 2001, 9.15, press 27 05 01 09 15.

Use the and buttons to move left and right through the display.

3Press OK/Menu to confirm the entry.

Your On-Air DECTf@x Plus can now be used to send and receive faxes.

NOTE

Once the date and time have been set, if you want to make a change press OK/Menu then 2 then 1 then OK/Menu to access the date and time setting function.

11

Page 12
Image 12
BT On-Air DECTf@x Plus F@x machine and digital telephone system manual Button What itÕs used for, Date and time