4To end the call, press the red button.

You can dial the number before pressing the green button:

1Dial the number you want to call.

Use the C button to delete numbers to make sure you don’t dial a wrong number.

2Press the green button. The number entered is dialled after a few seconds.

To receive a call

1When your handset rings press the green button.

2Press the red button to hang up after the call is over.

If you hear beeping from the handset while you are using it, it means that the battery is running low and needs charging.

If you hear fax tones when you answer the handset pressing # then 7 will automatically transfer the signal to the fax machine.

Using your handset

Answering mode

You can set the handset to automatically answer and finish calls when you remove and replace the handset in the charger. There are 3 settings: -

Mode 0: the feature is off and you must always press the green button to answer a call and the red button to end a call.

Mode 1: lift the handset from the charger whilst it is ringing and it will automatically answer the call.

Replacing the handset in the charger will end the call.

Mode 2: you must always press the green button to answer a call but replacing the handset in the charger will end the call.

NOTE

If the handset is not in the charger then you must always press the green button to answer a call and the red button to end a call.

To choose the mode

1Press OK. The display shows F (function). Then press 8. The display shows F8 and the current mode setting (0 , 1 or 2).

2Use the or the button to change the mode.

29

Page 30
Image 30
BT On-Air DECTf@x Plus F@x machine and digital telephone system manual Answering mode