Using the answering machine
4Press the red button on the handset to stop recording.
5Press Stop at the base station to return to standby. The PLAY light will flash and the display will show that a new message has been recorded.
Note: if you have created any mailboxes, you will be asked to enter a mailbox number before recording. Enter the number of the mailbox you want the message stored in. The general memory is mailbox 0.
If you have any mailboxes set up, the base station will ask you for a mailbox number. If you want to record the memo in a mailbox, enter the relevant number (1 - 5). If you want to record in the main memory, press 0.
Operating the answering machine from the handset
You are able to fully control your
•Press INT, then 7 then the green button on the handset to access the answering
machine.
Intercom
38
While listening to your messages
Press To
Pause or restart listening
Skip to the next message
Restart listening to a message
Skip to the previous message
After listening to your messages
Press To
Replay all messages
Delete all messages
Record a new outgoing message
Stop recording the outgoing message
Listen to your outgoing message
Switch on the answering machine
Switch off the answering machine
•To finish operating the answering machine, press the red button.
To remotely access your answering machine see ‘Remote access’, on page 60.
