![](/images/new-backgrounds/1299513/29951321x1.webp)
Setting up
Install the battery in the handset and charge them for at least 16 hours.
WARNING
Under no circumstances should
Fully discharging the batteries at least once a week will help them to last as long as possible.However, the charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from any BT Shop or from the helpline on 0845 601 2476.
Slide off the battery cover and install the battery. Replace the battery cover.
When the battery has been charged for at least 16 hours the display will show the symbol.
Battery low warning
If the handset battery symbol is empty and you hear warning beeps, you will need to recharge your handset before you can use it.
Empty 1/3 2/3 Full
Battery performance
Your handset is supplied with NiMH batteries. These need to be initially charged continuously for 16 hours to reach full charge.
Note that the battery charge icon does not indicate the correct level when the batteries are first installed. The batteries must first be fully charged.
5 Customising your On-Air DECTf@x Plus
Your BT
Step by step - by using the OK/Menu, and ▲ and
▼buttons to scroll through the
Direct access - by pressing the OK/Menu button and then entering the number of the required function.
Most instructions in this user guide are based on the ‘direct access’ method, which is a more effective way of operating your fax machine.
10