3-113
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Nodes
Configuration Data Tab: IP Addresses Not for SNMP
To view non-SNMP IP address information for the selected node, select the
Configuration Data tab.
The IP Addresses Not for SNMP sub-section displays the following information
for the selected node:
•IP Address—IP addresses associated with this node that are not intended for
SNMP.
If there are no IP addresses defined for the node that are not intended for SNMP,
this field displays the phrase There are no other IP addresses defined for this
node.
Configuration Data Tab: ITP Uptime Information
To view ITP uptime information for the selected node, select the Configuration
Data tab.
The ITP Uptime Information sub-section displays the following information for
the selected node:
•ITP Uptime—Time the ITP has been up, in weeks, days, hours, minutes, and
seconds.
•Reboot Reason—Reason for the last reboot of the ITP.
Configuration Data Tab: Polling Information
To view polling information for the selected node, select the Configuration Data
tab.
The Polling Information sub-section displays the following information for the
selected node:
•First Discovered—Date and time that the node was first discovered by SGM.
•Last Poll IP Address—Last IP address that was polled for this node. For a
non-ITP node, this field is left blank.
•Last Full Poll Time—Date and time of the last full poll of the node for
ITP-related MIBs (as opposed to a demand poll for just one linkset’s worth of
data). For a non-ITP node, this field is left blank.