Chapter3 Managing ITP Networks Using SGM
Editing an ITP Route Table File
3-282
Cisco Signaling Gateway Manager User Guide
78-15589-01
The Replace Linkset Dialog enables you to quickly replace incorrect linkset
entries in route table files:
–
To replace an incorrect linkset with a correct linkset, select an incorrect
linkset in the Linksets That Are No Longer Valid table, then select a
correct linkset from the Auto Replace with Linkset drop-down list box,
then click Apply. SGM automatically replaces the incorrect linkset with
the selected correct linkset in all affected entries in the route table file.
–
To remove all entries that contain an incorrect linkset from the route table
fie, select an incorrect linkset in the Linksets That Are No Longer Valid
table, then select the Remove Entries Containing Selected Linkset
checkbox, then click Apply. SGM automatically removes all entries that
contain the incorrect linkset from the route table file.
–
When you have corrected all incorrect linksets in the route table file,
click Done. SGM displays the Route Table Dialog (Figure 3-66).
If the selected route table file does not contain any incorrect linkset entries,
SGM displays the Route Table Dialog (Figure 3-66).
•To open a route table file from an ITP, use one of the following procedures:
–
Select a node, signaling point, or linkset on a window, then select Edit >
Route Table > From ITP from the SGM Main Menu. (If you select an
Unmanaged node, this option is grayed-out and cannot be selected.)
–
Right-click a signaling point on a window, then select Edit Route Table
from the right-click menu. (If you select an Unmanaged signaling point,
this option is grayed-out and cannot be selected.)
SGM displays the Choose Signaling Point dialog (Figure3-65), which
enables you to select the signaling point whose route table you want to edit.
Figure3-65 Choose Signaling Point Dialog