Chapter3 Managing ITP Networks Using SGM
Working with Linksets
3-64
Cisco Signaling Gateway Manager User Guide
78-15589-01
Statistics Tab: Utilization Information
To view utilization information for the selected linkset, select the Statistics tab.
The Utilization Information sub-section displays the following information for
the selected linkset:
•Send Plan Capacity—Planned capacity of the linkset to send, in bits per
second.
–
For a linkset of type Serial or HSL, available bandwidth for the linkset.
–
For a linkset of type SCTPIP or Mixed, set on the ITP using the
plan-capacity CS7 linkset configuration command.
If Send Plan Capacity is not set on the ITP for this linkset, this field
displays the value 0.
–
For a linkset of type Other, this field always displays the value 0.
•Send Utilization—Amount of the linkset’s send capacity being used, as a
percentage or in Erlangs (as set in the Preferences window), calculated using
the following formula:
Send Utilization = (Bits Sent Per Sec)/Planned Capacity
This field initially displays the phrase Waiting for second poll. After two
polling cycles, SGM populates this field with actual calculated rates.
–
For a linkset of type SCTPIP or Mixed, if Send Plan Capacity is not set
on the ITP for this linkset, this field displays the phrase Set Plan
Capacity on ITP.
–
For a linkset of type Other, this field always displays the phrase Set Plan
Capacity on ITP.
•Receive Plan Capacity—Planned capacity of the linkset to receive, in bits
per second.
–
For a linkset of type Serial or HSL, available bandwidth for the linkset.
–
For a linkset of type SCTPIP or Mixed, set on the ITP using the
plan-capacity CS7 linkset configuration command.
If Receive Plan Capacity is not set on the ITP for this linkset, this field
displays the value 0.
–
For a linkset of type Other, this field always displays the value 0.