Chapter3 Managing ITP Networks Using SGM
Working with Nodes
3-94
Cisco Signaling Gateway Manager User Guide
78-15589-01
•ITP Uptime—Time the ITP has been up, in weeks, days, hours, minutes, and
seconds.
•Reboot Reason—Reason for the last reboot of the ITP.
•Notes—Indicates whether there is a note associated with the node.
•Events—Indicates whether there is a recent event associated with the node.
–
To delete the event icon from SGM displays for a specific node, for this
SGM client only, select the node and click the icon.
–
To delete the event icon from SGM displays for all nodes, for this SGM
client only, select Edit > Clear All Events from the SGM Main Menu.
Note During Discovery, SGM might flag most nodes with an event icon. If
the event icons are too distracting, use the Edit > Clear All Events
menu option to remove them.
•Last Status Change—Date and time that the status of the node last changed.
•Status—Current status of the node. Possible values are:
–
Active (green ball)—The node is currently fully functional.
–
Discovering (gray ball)—The node is being discovered, and SNMP
queries have been sent to the device.
–
Polling (gray ball)—The node is being polled.
–
Unknown (red ball)—The node failed to respond to an SNMP request.
SGM sets all associated signaling points, linksets, and links to
Unknown.
–
Unmanaged (gray ball)—One of the following situations exists:
– The node is known indirectly by SGM. In other words, SGM knows the
device exists but there is no known SNMP stack on the device for SGM
to query.
– An SGM user has set the node to Unmanaged status, to prevent SGM
from polling the node.
If the associated signaling points are referenced via linksets to other
signaling points, SGM automatically sets all associated signaling points
to Unmanaged, and deletes all associated linksets and links, as well as
all linksets and links that reference the node as an adjacent node.