Chapter3 Managing ITP Networks Using SGM
Integrating SGM with Other Products
3-402
Cisco Signaling Gateway Manager User Guide
78-15589-01
Integrating SGM with CiscoWorks2000
SGM can integrate with CiscoWorks2000 during installation, registering with
CiscoWorks2000 as an installed application. See the “Installing SGM on Solaris”
and “Installing SGM on Windows” chapters of the Cisco Signaling Gateway
Manager Installation Guide for more information.
You can also integrate SGM with CiscoWorks2000 after installation, using the
sgm cw2ksetup command. See the “SGM Command Reference” section on
page B-1 for more information.
When SGM is integrated with CiscoWorks2000, you can launch the
CiscoWorks2000 Device Center and CiscoView from the SGM Main Menu. See
the following sections for more information:
•Launching the CiscoWorks2000 Device Center, page3-402
•Launching CiscoView, page3-403

Launching the CiscoWorks2000 Device Center

The CiscoWorks2000 Device Center provides a number of useful Web-based
device-monitoring functions, including reachability trends, response time trends,
interface status, Syslog browsing, and a detailed inventory.
To link SGM to the Device Center:
Step1 Make sure CiscoWorks2000 is installed in the network.
Step2 Select a node that you know CiscoWorks2000 is monitoring, or an associated
linkset, in a window. If you select a non-ITP node, or a node with a status of
Unmanaged or a Device Type of Unknown, the CiscoWorks2000 menu option
is grayed-out.
Step3 Select Products > CiscoWorks2000 > Device Center from the SGM Main Menu.
Step4 At the prompt, enter a CiscoWorks2000 userID and password. SGM links to
CiscoWorks2000 Device Center dashboard.