3-371
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
Step3 (Optional) If this is the first time you are using the sgmlinkstats command to
generate a report, you must enter the command two more times:
•The first entry gets the first set of raw data.
•The second entry calculates begins calculating useful link and linkset
statistics.
•The third entry continues to calculate statistics, calculates long-term
averages, and, if the data being collected appears valid, begins generating the
report.
Thereafter, you need only enter this command once to generate the report.
Step4 SGM generates the custom link and linkset statistics summary report and stores it
in the /custom directory, identified by its ID tag.
For example, if you entered the command:
# ./sgm linkstats sgm-2600a.cisco.com test1 -sls
SGM generates the following reports:
sgmLinkStats.custom.test1.2002-10-27.csv.zip
sgmLinksetStats.custom.test1.2002-10-27.csv.zip
If you installed SGM in the default directory, /opt, then the /custom directory is
located at /opt/CSCOsgm/reports/custom.
If you installed SGM in a different directory, or if you moved the report files
directory using the sgm repdir command, then the /custom directory is located in
that directory.
Step5 For information on viewing the report, see the “Viewing the Custom Network
Statistics Export Files” section on page 3-379.