3-355
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
The Link Statistics: Daily Summary Report page displays the following
information:
•Number and Sort Order (in header)—Displays the number of records in
the table, the column by which the table is sorted, and whether the sort is in
ascending or descending order.
•Node—Name of node for the link. To see statistics for only a selected node,
click the node name.
•Inst Name—Name of instance for the link.
•Sig Point—Name of signaling point for the link. To see statistics for only a
selected signaling point, click the signaling point.
•Link Name—Name of the link. To see statistics for only a selected link, click
the link name.
•Type—Type of link. Possible link types are:
–
HSL—The link uses the SS7-over-ATM (Asynchronous Transfer Mode)
high-speed protocol.
–
SCTP—The link uses the Stream Control Transmission Protocol (SCTP)
IP transport protocol.
–
Serial—The link uses the serial SS7 signaling protocol.
–
Virtual—The link is a virtual link, which connects signaling point
instances running on the same device. SGM does not poll virtual links,
nor does it display real-time data or accounting statistics for virtual links.
•Avg Send Util or Avg Send Erls—Average Send Utilization for the link,
expressed as either a utilization percentage or a number of Erlangs (as set in
the Preferences window), for the specified date.
If the planned send capacity is not set for the link, this field displays NoCap.
•Peak Send Util or Peak Send Erls—Highest hourly Average Send
Utilization for the link, expressed as either a utilization percentage or a
number of Erlangs (as set in the Preferences window), for the specified date.
•Peak Send Hour—Hour in which the Peak Send Utilization for the link
occurred, for the specified date.