Chapter3 Managing ITP Networks Using SGM
Working with Signaling Points
3-164
Cisco Signaling Gateway Manager User Guide
78-15589-01
Valid values are:
•Cisco2600—Cisco 2650, Cisco 2650XM, Cisco 2651, Cisco2651XM
•Cisco7204—Cisco 7204, Cisco 7204VXR
•Cisco7206—Cisco 7206, Cisco 7206VXR
•Cisco7507—Cisco 7507, Cisco 7507mx, Cisco 7507z
•Cisco7513—Cisco 7513, Cisco 7513mx, Cisco 7513z
•IPDevice—IP device, other than those listed above. You can assign this icon
to an unknown signaling point if you know that it is an IP device.
•MSC—Mobile switching center. You can assign this icon to an unknown
signaling point if you know that it is an MSC.
•SCP—Service control point. You can assign this icon to an unknown
signaling point if you know that it is an SCP.
•SSP—Service switching point. You can assign this icon to an unknown
signaling point if you know that it is an SSP.
•STP—Signal transfer point. You can assign this icon to an unknown signaling
point if you know that it is an STP.
•SignalingPoint—An SCP, SSP, or STP, or an ITP instance.
•Unknown—SGM is unable to determine the signaling point type.
At any time, you can click Cancel to exit the dialog without saving any changes.
When you are satisfied with your changes, click Save. SGM saves your changes
and updates all SGM windows to reflect your changes.