Chapter3 Managing ITP Networks Using SGM
Working with Nodes
3-134
Cisco Signaling Gateway Manager User Guide
78-15589-01
You can also remove the Unmanaged status from a node, when you are ready to
return the node to the SGM poll list. To remove the Unmanaged status from a
node:
Step1 Select a node in a window.
You cannot remove the Unmanaged status from a node with a Device Type of
Unknown:
•If you select a node with a Device Type of Unknown, then this menu option
is grayed-out and cannot be selected.
•If you select more than one node, and at least one of them has a Device Type
of Unknown, then this menu option is grayed-out and cannot be selected.
Step2 Select Edit > Manage from the SGM Main Menu, or Manage from the right-click
menu. SGM removes the Unmanaged status from the selected node, returns it to
the poll list, and polls it immediately.
Polling a NodeSGM automatically polls nodes at specified intervals. However, you can also
request an immediate poll for a node.
To poll a node from the Discovery Dialog, use the following procedure:
Step1 Select Edit > Network Discovery from the SGM Main Menu. SGM displays the
Discovery Dialog (Figure 3-2).
Step2 Select the Discovery tab. SGM displays the Discovery panel (Figure 3-5). The
Discovered Nodes section of the Discovery panel lists all discovered nodes.
Step3 Select one or more nodes. You cannot poll a node with a Primary SNMP Address
of N/A:
•If you select a node with a Primary SNMP Address of N/A, then the Poll
Node button is grayed-out and cannot be selected.
•If you select more than one node, and even one of them has a Primary SNMP
Address of N/A, then the Poll Node button is grayed-out and cannot be
selected.