3-9
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Discovering the Network
–
Size (bytes)—Size of the seed file or folder, in bytes.
–
Make this my preferred start option—Specifies whether the selected
seed file is to be loaded automatically whenever this SGM client is
started or the Discovery Dialog is opened. By default, this checkbox is
cleared for all seed files. That is, no seed file is loaded automatically
when the SGM client is started or the Discovery Dialog is opened.
–
Number of Files—Total number of seed files and folders (displayed in
bottom left corner).
To load a seed file, select the seed file in the list and click OK.
SGM closes the Load File Dialog: Seed File List dialog, loads the seed file,
and returns to the Discovery Dialog. SGM lists all of the seed nodes in the
seed file in the left pane of the window, and displays details of the SNMP
settings for the seed nodes in the right pane.
To close the Load File Dialog: Seed File List dialog without loading a seed
file, click Cancel.
Step5 Select the Discovery tab, or click Next. SGM displays the Discovery panel
(Figure 3-4), which enables you to discover the nodes, signaling points, linksets,
and links in your network. (If you enter a seed node IP address or name in the IP
Address or DNS Hostname field, then click Next, SGM automatically adds the
seed node before displaying the Discovery panel.)