3-261
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Viewing the Topology of the Network
SGM automatically assigns the following node elements:
•Cisco 2650 series router
•Cisco 2650XM series router
•Cisco 2651 series router
•Cisco 2651XM series router
•Cisco 7204 series router
•Cisco 7204VXR series router
•Cisco 7206 series router
•Cisco 7206VXR series router
•Cisco 7507 series router
•Cisco 7507mx series router
•Cisco 7507z series router
•Cisco 7513 series router
•Cisco 7513mx series router
•Cisco 7513z series router
•IP device, other than other than those listed above (if assigned by a user; see
the “Editing a Node” section on page 3-124 for more details)
•Signaling point—An SCP, SSP, or STP, or an ITP instance.
•SS7—SGM is unable to determine the node type.
In addition, users can assign the following node elements (see the “Editing a
Node” section on page 3-124 for more details):
•MSC—Mobile switching center
•SCP—Service control point
•SSP—Service switching point
•STP—Signal transfer point