3-291
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
To edit a GTT file using SGM:
Step1 Launch the SGM GTT client, using one of the following procedures:
•Select Products > Global Title Configurator from the SGM Main Menu.
•Select Start > Programs > CiscoSGM Client > Launch SGM GTT Client
in Windows.
•Enter the sgm gttclient command. See the “SGM Commands and
Descriptions” section on page B-2 for more information on the use of this
command.
Note The GTT Configurator runs as a separate application in SGM, so it
requires a separate login, just like the SGM client.
Step2 SGM displays the Startup Options dialog, which enables you to load a specific
GTT file, or to create a new GTT file.
•If you choose to load an existing GTT file, SGM displays the Load File
Dialog: GTT File List. See Step 22 for more information. Select a GTT file
to load.
•If you choose to create a new GTT file, SGM displays the Create New Table
Dialog. See Step 21 for more information. Create the new GTT file.
SGM displays the GTT Configurator window, with the Selectors and GTA tab
selected (Figure 3-69).