3-155
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Signaling Points
Configuration Data Tab: QoS Information
To view quality of service (QoS) information for the selected signaling point,
select the Configuration Data tab.
The QoS Information sub-section displays the following information for the
selected signaling point:
•QoS—Quality of service (QoS) class of the signaling point. Valid QoS
classes range from 1through 7. ALL indicates that the signaling point
accepts all QoS classes.
•ToS— Type of service (ToS) of the signaling point.
•DSCP—IP differentiated-services-code-point (DSCP) of the signaling point.
Notes Tab
To view notes for the selected signaling point, select the Notes tab.
The Notes section displays:
•Notes associated with the signaling point.
•The date and time the notes associated with the signaling point were last
updated, or the phrase Not Set if there are no notes associated with the
signaling point.
•The phrase No Notes if there are no notes associated with the signaling point.
Recent Events Tab
To view information about all recent events associated with the signaling point,
select the Recent Events tab. SGM displays the Recent Events table for the
signaling point (Figure 3-32).