Chapter3 Managing ITP Networks Using SGM
Working with Linksets
3-62
Cisco Signaling Gateway Manager User Guide
78-15589-01
•Link—Name of the link associated with the event. If there is no link
associated with the event, None is displayed.
•Message—Text of the message.
You can customize this field. See the “Modifying the SGM Event
Configuration File (SolarisOnly)” section on page 5-26 for more
information.
ITP Access Lists Tab
To view information about all access lists associated with the selected linkset and
its adjacent linkset, select the ITP Access Lists tab.
For each linkset, the ITP Access Lists section displays the following information:
•Current Poll Interval—Poll interval used to collect data for the table.
•Last Poll—Time the last poll was run. This field initially displays the phrase
Polling device. After the first polling cycle, SGM populates this field with the
actual time of the last poll.
•Linkset—Name of the linkset for which access lists are being displayed.
•In—Inbound access lists for the linkset. If the linkset has no inbound access
lists, this field displays None.
•Out—Outbound access lists for the linkset. If the linkset has no outbound
access lists, this field displays None.
•List #—Access list number configured on the node and applied to the linkset.
ITP uses access list numbers 2700 through 2799.
•Access List—List of commands in the access list.
Statistics Tab: Packet Information
To view packet information for the selected link, select the Statistics tab.