Chapter3 Managing ITP Networks Using SGM
Working with Nodes
3-92
Cisco Signaling Gateway Manager User Guide
78-15589-01
Viewing Basic Information for Nodes
To view basic information for nodes, select Nodes in the left pane of the SGM
Main Window. SGM displays the Node Window (Figure3-23).
Figure3-23 Node Window
The Node Window displays information about the nodes that have been
discovered by SGM.
By default, SGM displays all of the columns in the node table except Internal ID,
ITP Uptime, Reboot Reason, and Last Status Change. To display these
columns, or to hide other columns, see the procedures in the “Modifying Node
Table Column Settings” section on page5-16.
To see mouse over help popup for each column in the table, place the cursor over
a column header.
If a cell is too small to show all of its data, place the cursor over the cell to see the
full data in a mouse over help popup.
You can resize each column, or sort the table based on the information in one of
the columns. See the “Resizing, Sorting, and Hiding Table Columns” section on
page 3-279 for more details. By default, this table is sorted by Status.