Chapter3 Managing ITP Networks Using SGM
Working with Links
3-202
Cisco Signaling Gateway Manager User Guide
78-15589-01
•Transmit Queue Depth—Number of packets waiting to be sent on by the
link.
•Transmit Queue High Depth—Highest level reached by the transmit queue
since the last reboot of the ITP, or since ITP last reset the averages as a result
of bad data.
•Transmit Queue High Reset—Level at which the link is to reset the transmit
queue. If the link is never to reset the transmit queue, this field displays
Never.
•Signal Link Test—Indicates whether test packets are being sent on the link.
Valid values are:
–
true (1)—Test packets are being sent.
–
false (2)—Test packets are not being sent.
Statistics Tab: Bit Information or Byte Information
To view bit information for the selected link (or byte information, if you cleared
the Show Details in Bits Instead of Bytes checkbox in the Preferences Window),
select the Statistics tab.
The Bit Information or Byte Information sub-section displays the following
information for the selected link:
•Sent Per Sec—Number of bits or bytes (as set in the Preferences window)
sent by the link per second. This field initially displays the phrase Waiting
for second poll. After two polling cycles, SGM populates this field with
actual calculated rates.
•Received Per Sec—Number of bits or bytes (as set in the Preferences
window) received by the link per second. This field initially displays the
phrase Waiting for second poll. After two polling cycles, SGM populates
this field with actual calculated rates.