Cisco Systems 78-15589-01 Modifying the Way SGM Handles Statistics Reports (Solaris Only)

3-335
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
•/custom—Contains all custom report files. These are the report files
generated using the sgm accstats and sgm linkstats commands.
Each file is identified with a unique ID tag, specified when the sgmaccstats
or sgmlinkstats command was entered. If the user did not specify an ID tag,
SGM uses the process ID of the sgm accstats or sgm linkstats command.
•/etc—Contains additional files used by the SGM reporting scripts and Web
pages, including the nodes.include, linksets.include, nodes.exclude, and
linksets.exclude files, if they exist.
This section includes the following information:
•Modifying the Way SGM Handles Statistics Reports (Solaris Only),
page 3-335
•Changing the SGM Reports Directory (Solaris Only), page 3-342
•Viewing SGM Network Statistics Reports, page3-343
•Viewing SGM Accounting Statistics Reports, page3-364
•Generating and Viewing Custom SGM Statistics Reports, page3-369
•Viewing SGM Point Code Inventory Reports, page3-390
•Viewing SGM Statistics Reports Logs, page3-394
Modifying the Way SGM Handles Statistics Reports (Solaris
Only)
SGM enables you to modify the following aspects of statistics reports:
•To specify whether SGM is to generate network statistics reports, enter the
sgm statreps [disable|enable] command:
– To generate network statistics reports, enter sgmstatreps enable. This is
the default setting.
– To not generate network statistics reports, enter sgmstatreps disable.