Cisco Systems 78-15589-01 manual - page 3

3-3
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Configuring SNMP
Note If you want to change SNMP settings, do so before running Discovery.
To change SNMP settings in SGM:
Step1 Start the SGM client, as described in the “Starting SGM” section on page 2-2.
Step2 Select Edit > SNMP Configuration from the SGM Main Menu. (If you have
implemented SGM User-Based Access, this option is available to users with
authentication level Network Administrator [Level 4] and higher.) SGM displays
the SNMP Configuration Dialog (Figure3-1).
Figure3-1 SNMP Configuration Dialog
The SNMP settings table displays SNMP information for nodes in SGM.
Step3 (Optional) To delete a node, select it and click Delete.