3-351
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
•L Term Send Util or L Term Send Erls—Long-term average Send
Utilization for the link, expressed as either a utilization percentage or a
number of Erlangs (as set in the Preferences window), since SGM polling
began for the link, or since SGM last reset the averages as a result of bad data.
If the planned send capacity is not set for the link, this field displays NoCap.
•Recv Util or Recv Erls—Average Receive Utilization for the link, expressed
as either a utilization percentage or a number of Erlangs (as set in the
Preferences window), for the specified date and hour.
If the planned receive capacity is not set for the link, this field displays
NoCap.
•L Term Recv Util or L Term Recv Erls—Long-term average Receive
Utilization for the link, expressed as either a utilization percentage or a
number of Erlangs (as set in the Preferences window), since SGM polling
began for the link, or since SGM last reset the averages as a result of bad data.
If the planned receive capacity is not set for the link, this field displays
NoCap.
•Send MSUs—Total number of MTP3 MSUs sent on the specified date and
hour.
•Recv MSUs—Total number of MTP3 MSUs received on the specified date
and hour.
•Drop—Total number of drops on the specified date and hour.
•Hourly InSrv—Percentage of time the link was in service on the specified
date and hour.
•Long Term InSrv—Average percentage of time the link was in service since
SGM polling began for the link, or since SGM last reset the averages as a
result of bad data.
If a statistics calculation results in an impossible value, such as a number divided
by zero, or a number that is impossible based on the configuration, SGM displays
MathError in the field.