Chapter3 Managing ITP Networks Using SGM
Working with Events
3-250
Cisco Signaling Gateway Manager User Guide
78-15589-01
You can modify the following settings:
•Node—Drop-down list box of all nodes that have been discovered by SGM:
–
If you want to filter events based on a node, select a node from the
drop-down list box.
–
If you do not want to filter events based on a node, select None. SGM
grays-out the SP, Linkset, and Link fields. This is the default setting.
•SP—Drop-down list box of all signaling points associated with the selected
node:
–
If you want to filter events based on a signaling point, select a signaling
point from the drop-down list box.
–
If you do not want to filter events based on a signaling point, select None.
SGM grays-out the Linkset and Link fields. This is the default setting.
•Linkset—Drop-down list box of all linksets associated with the selected
signaling point:
–
If you want to filter events based on a linkset, select a linkset from the
drop-down list box.
–
If you do not want to filter events based on a linkset, select None. SGM
grays-out the Link field. This is the default setting.
•Link—Drop-down list box of all links that have been discovered by SGM:
–
If you want to filter events based on a link, select a link from the
drop-down list box.
–
If you do not want to filter events based on a link, select None. This is
the default setting.
•To res tor e Node to None, grays-out SP, Linkset, and Link, click Reset.
Step6 (Optional) To load an existing event filter, click Load in the Event Filter dialog.
SGM displays the Load File Dialog: Load Filter dialog (Figure 3-52).