3-309
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
Figure3-75 Selector Add Dialog
The Selector Add Dialog contains the following fields:
•Selector Name—Name of the selector to be added. Enter 1-to-12-character
alphanumeric string.
•Trans lati on Ty pe—Translation type to be used by the selector. Enter an
integer in the range 0through255.
•Global Title Indicator—Global title indicator for the selector. Select a value
from the drop-down list box. Valid values are:
–
2
–
4—This is the default value.
•Numbering Plan—(China and ITU only) Numbering plan for the selector.
Enter an integer in the range 0through15. This field is grayed-out if Global
Title Indicator is set to 2.
•Nature of Addr. Indicator—(China and ITU only) Nature of address
indicator for the selector. Enter an integer in the range 0through127. This
field is grayed-out if Global Title Indicator is set to 2.
•Pre-Conversion Table name—GTT address conversion table to apply prior
to performing local GTT translation.
If there is an address conversion table name in this field, the referenced table
must exist, and it must contain at least one address conversion entry.
If this field is blank, no address conversion is needed.