Chapter3 Managing ITP Networks Using SGM
Working with Nodes
3-118
Cisco Signaling Gateway Manager User Guide
78-15589-01
•Link—Name of the link associated with the event. If there is no link
associated with the event, None is displayed.
•Message—Text of the message.
You can customize this field. See the “Modifying the SGM Event
Configuration File (SolarisOnly)” section on page 5-26 for more
information.
Syslog Tab
To view all messages in the ITP system log for the selected node, select the Syslog
tab.
The Syslog table displays the following information for the selected node:
•Current Poll Interval—Poll interval used to collect data for the table.
•Last Poll—Time the last poll was run. This field initially displays the phrase
Polling device. After the first polling cycle, SGM populates this field with the
actual time of the last poll.
•Timestamp—Date and time of the syslog message from the ITP.
•Severity—Severity of the syslog message. Possible values are:
–
Alert—Messages that require immediate action.
–
Critical—Critical conditions.
–
Debug—Debug messages, log FTP commands, and WWW URLs.
–
Emergency—System unusable messages.
–
Error—Error messages.
–
Info—Information messages.
–
Notice—Normal but significant conditions.
–
Warnin g—Warning messages.
•Facility—Name of the facility that generated the syslog message, such as
SYS, SNMP, CS7MTP3, or CS7PING.
•Name—Short text identifier for the message type. A facility name in
conjunction with a message name uniquely identifies a syslog message type.
•Message—Text of the syslog message.