Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
3-336
Cisco Signaling Gateway Manager User Guide
78-15589-01
•To specify whether SGM is to generate network statistics reports in export
format, enter the sgm statreps [export |noexport] command:
–
To generate network statistics reports in export format, enter
sgm statrepsexport. This is the default setting.
–
To not generate network statistics reports in export format, enter
sgm statrepsnoexport.
•To specify whether SGM is to generate accounting statistics reports, enter the
sgm statreps [acct|noacct] command:
–
To generate accounting statistics reports, enter sgmstatreps acct.
Accounting must be enabled on the links in order for SGM to generate
accounting statistics.
–
To not generate accounting statistics reports, enter sgmstatreps noacct.
This is the default setting.
•To specify whether SGM is to include links that use the Stream Control
Transmission Protocol (SCTP) IP transport protocol in network statistics
reports, enter the sgm statreps [iplinks|noiplinks] command:
–
To include SCTPIP links, enter sgmstatreps iplinks. This is the default
setting.
–
To not include SCTPIP links, enter sgmstatreps noiplinks.
•To specify whether SGM is to include links that do not have planned send and
receive capacities in network statistics reports, enter the sgmstatreps
[nullcaps |nonullcaps] command:
–
To include links that do not have planned send and receive capacities,
enter sgm statreps nullcaps. This is the default setting.
–
To not include links that do not have planned send and receive capacities,
enter sgm statreps nonullcaps.
•To set the time mode for dates in network statistics reports, enter the
sgm statreps timemode [12 |24] command:
–
To use 24-hour time, also called military time, enter sgmstatreps
timemode 24. 1:00 in the afternoon is 13:00. This is the default setting.
–
To use 12-hour time, with AM and PM, enter sgmstatreps
timemode 12. 1:00 in the afternoon is 1:00 PM.