3-393
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
On the Point Code Inventory: Daily Reports page, point code inventory reports are
archived by date. Each archived file contains a list of all point codes that were
being used by all nodes that were known to SGM on that date.
To view an archived point code inventory report, click a date. SGM displays the
Point Code Inventory: Date page, which displays the archived list of point codes
for that date, including the following information:
•Number and Sort Order (in header)—Displays the number of point codes
in the table, the column by which the table is sorted, and whether the sort is
in ascending or descending order.
•Signaling Point Name—Name of the signaling point.
To sort the point codes by signaling point in descending order, click the
Signaling Point Name header.
Click again to sort the point codes in ascending order.
•Point Code—Point code that was being used by a node on the specified date.
To sort the point codes by point code in ascending order, click the Point
Codes header. This is the default display.
Click again to sort the point codes in descending order.
•Node Name—Name or IP address of the node.
To see detailed information for the node, click the node name.
To sort the point codes by node in descending order, click the Node Name
header.
Click again to sort the point codes in ascending order.
•Point Code Type—Type of point code:
–
Primary—Main point code used by a node.
–
Secondary—Alternate or backup point code used by a node.
–
Capability—Shared by more than one node, each of which is also
assigned a “real” point code. Also called an alias point code.
To sort the point codes by type in ascending order, click the Point Code Type
header.
Click again to sort the point codes in descending order.