3-207
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Links
•IP Address—(SCTP links only) IP address corresponding to the
media-dependent “physical” address. If the interface does not have such an
address (for example, a serial line), this field displays N/A.
•IP Mask—(SCTP links only) Subnet mask corresponding to the
media-dependent “physical” address. If the interface does not have such an
address (for example, a serial line), this field displays N/A.
•Physical Address—(SCTP links only) Address of the interface at the
protocol layer immediately “below” the network layer in the protocol stack.
If the interface does not have such an address (for example, a serial line), this
field displays N/A.
Interface Details Tab: Status Information
To view detailed interface status information for the selected link, select the
Interface Details tab.
The Status Information sub-section displays the following information for the
selected link:
•ITP Uptime—Time the link has been up, in weeks, days, hours, minutes, and
seconds.
•Admin Status—Desired state of the interface. Possible values are:
–
Up
–
Down
–
Test ing
•Operational Status—Current operational state of the interface. Possible
values are:
–
Up
–
Down
–
Test ing
–
Unknown
–
Dormant