3-211
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Links
M2PA Peer Config Details Tab: Transmission Configuration Information
To view detailed M2PA peer transmission configuration information for the
selected link, select the M2PA Peer Config Details tab.
The Transmission Configuration Information sub-section displays the following
information for the selected link:
•MTU—Maximum transmission unit (MTU) size to be used by this SCTP
association. This is the smallest MTU size supported by any of the IP
addresses used by the SCTP association.
•In Streams—Inbound streams as negotiated when the SCTP association was
started.
•Out Streams—Outbound streams as negotiated when the SCTP association
was started.
•Maximum Retries—Maximum number of data retransmissions in the SCTP
association context.
•Local Receive Window Size—Current local receive window size for this
SCTP association.
•Remote Receive Window Size—Current local send window size for this
SCTP association.
•Initial Retry Timeout (msecs)—Initial timeout value, in milliseconds,
permitted by the SCTP implementation for the retry timeout.
•Minimum Retry Timeout (msecs)—Minimum timeout value, in
milliseconds, permitted by the SCTP implementation for the retry timeout.
•Maximum Retry Timeout (msecs)—Maximum timeout value, in
milliseconds, permitted by the SCTP implementation for the retry timeout.
•Bundle Chunks—Indicates whether the SCTP protocol allows chunks to be
bundled into a single datagram. Valid values are:
–
true (1)—Chunks are bundled.
–
false (2)—Chunks are not bundled.
•Bundle Timeout (msecs)—Time, in milliseconds, to wait to allow data
chunks to accumulate so that they can be transmitted in the same datagram.