3-119
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Nodes
CPU Processes Tab
To view CPU utilization information for the selected node, select the CPU
Processes tab.
The CPU Processes table is not available if the node is in Discovery, Polling,
Unknown, or Unmanaged status.
The CPU Processes table displays one CPU Utilization Percentage table for each
active Route Switch Processor (RSP) CPU.
The CPU Utilization Processes table displays the following information for the
selected node:
•Current Poll Interval—Poll interval used to collect data for the table.
•Last Poll—Time the last poll was run. This field initially displays the phrase
Polling device. After the first polling cycle, SGM populates this field with the
actual time of the last poll.
•PID—Process identifier.
•Name—Name of the process.
•Time Created—Total time since the process was created.
•Total Runtime—CPU time the process has used.
•Times Invoked—Number of times the process has been invoked.
•Average Runtime—Average CPU time for each process invocation.
•5 Sec %—Average CPU utilization percentage for the node over the last
5 seconds.
•1 Min %—Average CPU utilization percentage for the node over the last
minute.
•5 Min %—Average CPU utilization percentage for the node over the last
5 minutes.
•Priority—Process queue priority. Possible values are:
–
Low
–
Normal
–
High
–
Critical