3-175
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Links
–
Link Remote Interface Inactive
–
Link Inactive
If the cell is too small to show all of the status reason, place the cursor over
the cell to see the full status reason in a mouse over help popup.
The status reasons are listed in order of decreasing magnitude. If two or more
reasons apply, the reason of greatest magnitude is displayed.
If the status reason is Unsupported Configuration, correct the configuration
and enter the sgm cleandiscover command to delete all current network data
and begin a clean discovery of the ITP network. If the status reason is still
Unsupported Configuration, enter the sgm clean command to restore the
SGM server to a “clean” state, such as would exist after a new installation of
SGM. For more information on the use of these commands, see the “SGM
Commands and Descriptions” section on pageB-2.
Viewing Detailed Information for a Link
SGM can display detailed information about a selected link, including its
associated node, status, and other information.
To display detailed information for a link, use one of the following procedures:
•Select Links in the left pane of the SGM Main Window, right-click a link in
the right pane, then select View>Configuration Details in the right-click
menu.
•Select the turner beside Links in the left pane of the SGM Main Window, then
select a link.
SGM displays the Link Details Window (Figure 3-37).