3-197
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Links
•Linkset—Name of the linkset associated with the event. If there is no linkset
associated with the event, None is displayed.
•Link—Name of the link associated with the event. If there is no link
associated with the event, None is displayed.
•Message—Text of the message.
You can customize this field. See the “Modifying the SGM Event
Configuration File (SolarisOnly)” section on page 5-26 for more
information.
Status Details Tab
To view detailed status information for the selected link, select the Status Details
tab.
The Status Details section displays the following information for the selected
link:
•Protocol State Details—Detailed information about the state of the protocol
for this link. Possible values are:
–
Changeback control(TCBC): Changeback control is buffering data on
this link
–
Changeover control(TCOC): Changeover control is buffering data on this
link
–
Link availability control(TLAC): Adjacent Signalling point is restarting
–
Link availability control(TLAC): Emergency changeover is in progress
on this link
–
Link availability control(TLAC): Changeback is in progress on this link
–
Link availability control(TLAC): Changeover is in progress on this link
–
Link availability control(TLAC): The last changeover operation failed on
this link
–
Link availability control(TLAC): Inhibit command will be retried
–
Link availability control(TLAC): Management request in progress for
this link
–
Link availability control(TLAC): Signalling point is in the process of a
restart
–
Signalling routing control(TSRC): Changeover request is complete