Chapter3 Managing ITP Networks Using SGM
Viewing the Topology of the Network
3-264
Cisco Signaling Gateway Manager User Guide
78-15589-01
Step6 To see mouse over help popup in the topology map, place the cursor over a
signaling point or linkset. When you place the cursor over a linkset, the mouse
over help popup is displayed from the perspective of the closest signaling point.
Note You can turn off mouse over help. For details, see Step5 in the
“Modifying Overall Preference Settings” section on page 5-5.
Step7 (Optional) To make the topology map twice as large, click the Zoom the map by
a factor of 200% button, or select Topology Tools > Zoom > In from the SGM
Main Menu.
Step8 (Optional) To make the topology map half as large, click the Zoom the map by a
factor of 50% button, or select Topology Tools > Zoom > Out from the SGM
Main Menu.
Step9 (Optional) To zoom the topology map by a selected percentage, click the Select a
map viewing factor button, then either select a percentage from the drop-down
list box, or enter a percentage and click Enter. Valid values are integers in the
range 5 through 400.
Step10 (Optional) To zoom in on a selected area of the topology map, click the Zoom in
on an area button, or select Topol og y Too ls > Z oom > A rea from the SGM Main
Menu, then click in the topology map and drag a rectangle around the area you
want to zoom in on. SGM expands the selected area to fill the topology map.
Step11 (Optional) To adjust the size of the topology map to fit in the window, click the
Zoom to fit window button, or select Topol ogy Tool s > Z oom > Fi t from the
SGM Main Menu. This is the default setting the first time the map is displayed.
Step12 (Optional) To display the topology map in a circular layout, click the Circular
layout button, or select Topol og y To ol s > La you t > Ci rc ul ar from the SGM Main
Menu.