Cisco Systems 78-15589-01 Editing an ITP Route Table File

3-281
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Editing an ITP Route Table File
Editing an ITP Route Table File
ITP uses a route table to select the appropriate signaling path for each message,
or signal unit, that it must forward. The route table provides the destination point
code of the packet and the linkset name that can be used to forward the packet.
SGM enables you to edit ITP route table files for an ITP.
To edit a route table file using SGM:
Step1 Open the route table file, using one of the following procedures:
•To open a route table file from a file, select Edit > Route Table > From File
from the SGM Main Menu, select the name of a route table file, then click
OK.
If the selected route table file contains incorrect linkset entries (for example,
if your network configuration changed since the last time the route table file
was saved), SGM displays the Replace Linkset Dialog (Figure3-64).
Figure3-64 Replace Linkset Dialog