Cisco Systems 78-15589-01 Including Specific Linksets in Custom Reports

Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
3-376
Cisco Signaling Gateway Manager User Guide
78-15589-01
Keep in mind the following considerations:
– Each line in the special include file must contain a single node name, or
node name and signaling point name, that matches exactly the real, fully
qualified node name of the node, and each line must end with a colon (:).
For example:
sgm-75-59a.cisco.com:
sgm-26-51a.cisco.com:
To include a specific signaling point, specify the node name and
signaling point:
sgm-75-59a.cisco.com;net0:
sgm-26-51a.cisco.com;net1:
– Wildcard matching is not supported.
– If you specify a special include file on the sgm accstats or sgm linkstats
command, SGM ignores the nodes.include, linksets.include,
nodes.exclude, and linksets.exclude files, if they exist.
Including Specific Linksets in Custom Reports
When you generate a custom accounting statistics or network statistics report,
SGM enables you to limit the report to one or more specific linksets.
To generate a report that includes only the linksets listed in the user-defined
linksets.include file, create the file, then specify default in place of the node-list
argument in the sgm accstats or sgm linkstats command.
For example, the following command generates an accounting statistics report
that includes only the linksets specified in the linksets.include file:
./sgm accstats default