3-319
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
Figure3-79 MAP Add Dialog
The MAP Add Dialog contains the following fields:
•Primary Pt. Code—Primary point code for the MAP. Enter a point code.
•Primary SSN—Primary SSN for the MAP. Enter an integer in the range
2through 255.
•Multiplicity—Multiplicity setting for the MAP. Select a value from the
drop-down list box. Valid values are:
–
dom—Dominant. Always translate to the primary point code-SSN
combination if it is available. Translate to the backup point code-SSN
combination only if the primary combination is not available.
–
sha—Share equally between the primary point code-SSN combination
and the backup point code-SSN combination. This is the default value.
–
sol—Solitary MAP. There is no alternate if the point code or SSN is not
available.
•Backup Pt. Code—Backup point code for the MAP. Enter a point code.
•Backup SSN—Backup SSN for the MAP. Enter an integer in the range
2through 255.