3-395
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
To access the SGM System Reports Log: Last X Messages page, use one of the
following procedures:
•Select System Report Log from the SGM Server Home Page.
•Select Log from the menu bar of any SGM Network Statistics or Accounting
Statistics Web page.
•Enter the sgm replog command. See the “SGM Commands and Descriptions”
section on pageB-2 for more information on the use of this command.
The SGM System Reports Log: Last X Messages page displays the following
information:
•Last Update (in header)—Date and time the information on the page was
last updated by SGM.
•Row—Message number, assigned to the message by SGM.
•Time—Date and time the message was logged.
•Type—Type of message. Possible types are:
–
Error
–
Info
•Message—Text of the message.
Viewing the SGM System Report Parameters and Timers
The SGM System Report Parameters and Timers page displays the current values
of report parameters and timers for the server to which you are connected, and
which is currently running the SGM server.
To access the SGM System Report Parameters and Timers page, select System
Report Parameters from the SGM Server Home Page, or select Params from the
menu bar of any SGM Network Statistics or Accounting Statistics Web page.