3-61
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter3 Managing ITP Networks Using SGM
Working with Linksets
–
Status—Status change message generated.
–
Trap—SNMP trap messa ge generated.
You can customize this field. See the “Modifying the SGM Event
Configuration File (SolarisOnly)” section on page 5-26 for more
information.
•Severity—Severity of the event. Default values are:
–
Admin—The default color is cyan.
–
Error—The default color is coral.
–
None—The default color is white.
–
Normal—The default color is light green.
–
Warnin g—The default color is yellow.
You can customize this field. See the “Modifying the SGM Event
Configuration File (SolarisOnly)” section on page 5-26 for more
information.
•Note—Indicates whether there is a note associated with the event.
•Time—Date and time the event was logged.
•Ack By—If you have not implemented SGM User-Based Access, name of the
device that last acknowledged the event.
If you have implemented SGM User-Based Access, name of the user who last
acknowledged the event.
If no one has acknowledged the event, this field is blank.
•Ack Time—Date and time the event was last acknowledged or
unacknowledged.
•Node—Name of the node associated with the event. If there is no node
associated with the event, None is displayed.
•SP—Name of the signaling point associated with the event. If there is no
signaling point associated with the event, None is displayed.
•Linkset—Name of the linkset associated with the event. If there is no linkset
associated with the event, None is displayed.