Chapter3 Managing ITP Networks Using SGM
Working with Links
3-178
Cisco Signaling Gateway Manager User Guide
78-15589-01
Configuration Data Tab: Local IP Address Information (SCTP Links Only)
To view local IP address information for the selected SCTP link, select the
Configuration Data tab.
The Local IP Address Information sub-section displays the following information
for the selected link:
•IP Address—Local IP address associated with the link.
•Status—Current status of the IP address. Possible values are:
–
Active (green ball)—The IP address is currently fully functional.
–
Inactive (red ball)—The IP address is not currently functional.
Configuration Data Tab: Remote IP Address Information (SCTP Links Only)
To view remote IP address information for the selected SCTP link, select the
Configuration Data tab.
The Remote IP Address Information sub-section displays the following
information for the selected link:
•IP Address—Remote IP address associated with the link.
•Type— Indicates the designated primary IP address for the link (Primary)
and the IP address currently being used by the link (Effective).
Usually, the same IP address is both Primary and Effective. However, if the
primary IP address is down for some reason, a different IP address is used by
the link and is labeled Effective.
•Status—Current status of the IP address. Possible values are:
–
Active (green ball)—The IP address is currently fully functional.
–
Inactive (red ball)—The IP address is not currently functional.