Cisco Systems manual Front View of MGX 8230 with 23-Inch Mid-Mounting Brackets

Chapter 4 Enclosure Installation

Rack Mounting an MGX 8230

Step 1 If applicable, attach one mid-mounting bracket to each side of the MGX 8230.

Step 2 Have two people position the MGX 8230 into the rack.

Step 3 Use the 10-32 truss head screws to secure the MGX 8230 to the front mounting rails (or mid-mounting rails if appropriate).

Step 4 Use the10-32 screws to secure the MGX 8230 to the rear mounting rails and to the rear mounting bracket, if applicable.

23-inch rack mounting

Follow these steps to mount an MGX 8230 in a 23-inch rack:

Step 1 Attach the 23-inch mounting brackets to both sides of the MGX 8230 chassis, as shown in Figure 4-5.

Step 2 Have two people position the MGX 8230 into the rack.

Step 3 Using hardware that you supply, and is appropriate for your 23-inch rack, secure the MGX 8230 to the rack mounting rails.

Figure 4-5 Front View of MGX 8230 with 23-Inch Mid-Mounting Brackets

23829

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		4-9