Cisco Systems MGX 8230 manual Audience, Organization

Preface

This preface describes the objectives, audience, organization, and conventions of the

Cisco MGX 8230 Edge Concentrator Installation and Configuration Guide.

Audience

This publication is intended for the person who will do the physical installation of the MGX 8230. The MGX 8230 is typically co-located and rack-mounted with either an IGX 8400 or BPX series switch. The MGX 8230 installer should be familiar with electronic circuitry and wiring practices and have experience as an electronic or electromechanical technician, as well as with the Cisco IGX/BPX switches.

Note This Cisco MGX 8230 Edge Concentrator Installation and Configuration covers the installation and configuration for the equipment. The command reference and error codes for the MGX 8230 are described in the section “Related Documentation."

Warning Installation of the equipment should be performed by trained service personnel.

Organization

This document is organized into the following chapters:

•Chapter 1, “Introducing the MGX 8230”

•Chapter 2, “Module and Service Descriptions”

•Chapter 3, “Site Preparation”

•Chapter 4, “Enclosure Installation”

•Chapter 5, “Configuring the MGX 8230 Shelf”

•Chapter 6, “Card and Service Configuration”

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		xxi