Cisco Systems MGX 8230 manual Card Combinations, Illustrations, FRSM-2T3E3 LED Indicators

Chapter 2 Module and Service Descriptions

Frame Relay Service Modules

Card Combinations

The following card combinations are supported:

•MGX-FRSM-2CT3 front card with the BNC-2T3 back card

•MGX-FRSM-2T3E3 front card with a BNC-2T3 or BNC-2E3 back card

Note A special BNC-2E3A back card applies to Australia only. The BNC-2E3 applies to all other sites that require E3 lines.

Illustrations

For Illustrations of the Very High Speed FRSM front and back cards, see the following illustrations:

•For the MGX-FRSM-2CT3 front card, see Figure 2-16 on page 2-34.

•For the MGX-FRSM-2T3E3 front card, see Figure 2-17 on page 2-35.

•For the MGX-BNC-2T3 back card, see Figure 2-18 on page 2-36.

•For the MGX-BNC-2E3 back card, see Figure 2-19 on page 2-37.

FRSM-2T3E3 LED Indicators

Table 2-6and Table 2-7describe the FRSM-2T3E3 LED faceplate indicators.

Table 2-6 Card Level LED Indicators for the FRSM-2T3E3

Type of LED	Color	Meaning
ACT LED	Green	Active
STBY LED	Yellow	Standby
FAIL LED	Red	Fail
Table 2-7 Line Level LED Indicators for the FRSM-2T3E3
Type of LED	Color	Meaning
Individual Port LEDs	Green	Active and OK
	Red	Active and Local Alarm
	Yellow	Active and Remote Alarm

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		2-33