Cisco Systems MGX 8230 manual Module Requirements with Bulk Distribution and Redundancy

Contents

1:N Service Module Redundancy					2-12
Bulk Distribution Mode			2-12
Module Requirements with Bulk Distribution and Redundancy 2-13
Installation Requirements for the MGX-SRM-3T3/C									2-13
SRM Illustration and LED Indicators						2-13
ATM UNI Service Module (AUSM)					2-15
AUSM Features	2-15
Quality of Service (QoS) Management							2-15
Inverse Multiplexing			2-15
Physical Layer Features				2-16
AUSM Front Card Illustration and LED Description								2-17
Back Cards for the AUSM/B				2-18
Frame Relay Service Modules			2-20
Features Common to All FRSMs					2-20
Data-Link Layer features				2-20
Frame Relay features			2-20
ATM FUNI features			2-21
Frame Forwarding Features					2-21
Redundancy for Frame Service Modules 2-22
Hot Standby	2-22
1:1 Redundancy		2-22
1:N Redundancy		2-22
Connection Types on the FRSM					2-22
Frame Relay-to-ATM Network Interworking								2-23
Frame Relay-to-ATM Service Interworking 2-24
Frame Forwarding		2-26
ATM Frame-to-User Network Interface							2-26
Types of Frame Service Modules					2-27
FRSMs for T1 and E1 Lines					2-27
FRSMs for T3 and E3 lines					2-32
FRSMs for Serial Connections						2-38
Circuit Emulation Service Modules						2-45
CESM for T1 and E1 lines					2-45
CESM T1 and E1 Features					2-45
CESM for T3 and E3 lines					2-50
Voice Service: The VISM			2-55
VISM Documentation			2-55
Summary of Features Supported with VISM 2.0.1									2-55
VISM Redundancy			2-57
Card Combinations			2-57
				Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001										vii