Cisco Systems MGX 8230 manual Card Illustrations

Chapter 2 Module and Service Descriptions

Frame Relay Service Modules

Table 2-5 Line Level LED Indicators for the FRSM T1/E1

Type of LED	Color	Meaning
Individual Port LEDs	Green	Active and OK
	Red	Active and Local Alarm
	Yellow	Active and Remote Alarm

Card Illustrations

•Figure 2-14is an illustration of the front card (applies to both the MGX-FRSM-8T1 and MGX-FRSM-8E1).

•Figure 2-15is an illustration of the FRSM T1 and E1 back cards.

–AX-RJ48-8T1 is the T1 back card. An AX-R-RJ48-8T1 is required for redundancy support.

–AX-RJ48-8E1 and AX-SMB-8E1 are the E1 back cards for RJ48 and SMB connections. A special AX-R-SMB-8E1 card is required for redundancy support.

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		2-29